扁平状FeSiAl磁粉吸波性能的研究_秦浩.pdfVIP

网络出版时间：2013-09-30 14:01 网络出版地址：/kcms/detail/61.1133.TG1401.013.html Hot Working Technology 20 13,Vol.42,No. 18 扁平状FeSiAl 磁粉吸波性能的研究 秦 浩, 金 丹, 孙可为, 贺格平 渊西安建筑科技大学 材料与矿资学院袁 陕西 西安 710055冤 摘 要 采用机械球磨法制备扁平状FeSiAl 磁粉袁研究不同球磨时间和不同石蜡添加量对其电磁参数和吸波性能 的影响遥 研究表明袁FeSiAl 磁粉经机械球磨40 h 后有较好的扁平化效果袁且扁平状好的磁粉有着较好的电磁波吸收特 性曰随着石蜡含量增加袁磁导率不断减小遥 当石蜡添加量为30wt%时袁磁粉有良好吸波特性曰随材料厚度的增加袁反射率 不断减小且峰值向着低频段移动曰当成型厚度为3 mm 时袁在3.5 GHz 处具有最小反射率-18 dB遥 关键词 FeSiAl 扁平状磁粉曰电磁参数曰反射率 + 中图分类号 TG 132.2 72 文献标识码 A 文章编号 1001-3814(2013) 18-0042-03 Microwave Absorbing Properties of Flattened FeSiAl Magnetic Powder QIN Hao, JIN Dan, SUN Kewei, HE Geping (College of Materials Meneral Resources, Xian University of Architecture Technology, Xian 710055, China) Abstract 院Flattened FeSiAl-magnetic powder was prepared by mechanical milling. The electromagnetic parameters and absorbing properties under different milling time and different paraffin additional amount were studied. The results show that FeSiAl magnetic powder has a better flattening effect by mechanical milling for 40 h, and has a good electromagnetic wave absorption characteristics. As the paraffin content increases, permeability decreases: when the paraffin content is 30 wt% 袁the magnetic powder has good microwave absorbing characteristics. With material thickness increasing, the reflectivity continuously reduces and the reflection peak towards to the low-band. When the molding is 3mm in thickness 袁 FeSiAl-magnetic powder has a minimum reflectivity of -18 dB at 3.5 GHz.