ASTMB76503电沉积镀层和相关金属镀层孔隙度试验的选择.pdfVIP

Designation: B 765 – 03 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings1 This standard is issued under the fixed designation B 765; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1. Scope Hard-Drawn Copper Wire for Electrical Purposes2 1.1 This guide describes some of the available standard B 276 Test Method for Apparent Porosity in Cemented Carbides3 methods for the detection, identification, and measurement of porosity and gross defects in electrodeposited and related B 374 Terminology Relating to Electroplating3 metallic coatings and provides some laboratory-type evalua- B 537 Practice for Rating of Electroplated Panels Subjected tions and acceptances. Some applications of the test methods to Atmospheric Exposure3 are tabulated in Table 1 and Table 2. B 542 Terminology Relating to Electrical Contacts and Their Use4 1.2 This guide does not apply to coatings that are produced by thermal spraying, ion bombardment, sputtering, and other B 545 Specification for Electrodeposited Coatings of Tin3 similar techniques where the coatings are applied in the form of