土木工程毕业设计计算书(64页).pdfVIP

宏扬控股集团有限公司车间结构 摘 要 本工程为浙江省杭州市萧山区的宏扬控股集团有限公司车间，建筑面积9185m，框架2 结构5层，高度25m，使用年限为50年，建筑类型为乙类，抗震设防烈度为7度，设计基 本地震加速度值为0.10g。 结构体系采用框架结构，结构计算以PKPM软件电算为主，手算为辅。电算的流程为 PMCAD建模、设置参数，TAT计算，最终获得基础、柱、梁和板施工图。手算从PKPM软件 计算获得的恒荷载、活荷载、风荷载以及地震荷载分别作用下的弯矩图、剪力图和轴力图 为基础，进行内力组合获得最不利组合，再进行梁、柱截面配筋计算。另外，手算还进行 楼梯以及基础设计。 关键词 结构设计；PKPM电算；手算 STRUCTURALDESIGNOF STRUCTURALDESIGNOF SSTTRRUUCCTTUURRAALLDDEESSIIGGNNOOFF HONGYANGHOLDINGGROUPCO,TDL HONGYANGHOLDINGGROUPCO,TDL HHOONNGGYYAANNGGHHOOLLDDIINNGGGGRROOUUPPCCOO,,TTDDLL WORKSHOP WORKSHOP WWOORRKKSSHHOOPP ABSTRACT ABSTRACT AABBSSTTRRAACCTT This engineering is zhejiang hangzhou xiaoshan area Hongyang holding group Co., LTD workshop. Total building’s area is 9185 m2. According to the use, the construction is devided into 5 layers. Main building’s elevation is 25 m . The Useful life of 50 years. The seismic intensityis 7degrees andthe basic designearthquakeaccelerationis 0.05g。 The project structure is frame. The structure is calculated by PKPM software, and with hand count. after PMCAD modeling and parameter setting, in end of the calculation we can gain the structural working drawing of foundation, columns, beams and boards by SATWE calculation in PKPM software.Calculation by hand is based on the moment graph,shearing force graph and axial force graph of gravity load, live load, wind load and seismic load ,which is provied by PKPM software. The most dagerous internal forces are found through analysis.Then the reinforced bars is determined according to the most dangerous forces.In addition, the stairs andfoundation designed by hand calculation. KEYWORDS KEYWORDS KKEEYYWWOORRDDSS structural