AM50镁合金多道次热轧中动态再结晶过程的有限元模拟及实验研究(英文期刊).pdfVIP

Trans. Nonferrous Met. Soc. China 23(2013) 2686−2691 Size effects on plastic deformation behavior in micro radial compression of pure copper 1 2 2 2 1 Li-dong CHENG , Chuan-jie WANG , Chun-ju WANG , Bin GUO , Zhen-long WANG 1. School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; 2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China Received 10 July 2012; accepted 26 May 2013 Abstract: Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing scatter of forming force and more irregular surface topography occurred with the increase of grain size. A modified surface model based on dislocations pile-up in surface layer grains, and a flow stress scattering formulation based on standard deviation and grain size distribution were proposed to analyze size effects on forming force in micro compression. The inhomogeneous deformation of surface layer grains was discussed by the main deformation manner of rotation. A good agreement with the experimental results was achieved. Key words: micro-forming; size effects; radial compression; inhomogeneous deformation; scatter of forming force proposed a surface model to interpret the phenomena. 1 Introduction Size effects also occur