不同制备因素对超细电气石粉体粒度的影响.pdfVIP

第 卷第 期 33 5 Vol.33 No.5 非金属矿 年 月 2010 9 Non-Metallic Mines September, 2010 不同制备因素对超细电气石粉体粒度的影响 祝爱侠  过世东* （江南大学 食品学院，江苏 无锡 214122） 摘  要 电气石具有压电效应和热释电效应，其超细粉体在环保、空气净化和水质处理等领域有广泛应用。本实验主要利用湿法研磨法对 电气石进行超细处理，以粒度为指标，分析讨论不同的分散剂、分散剂用量、固形物浓度和研磨时间等因素对超细电气石粒度的影响，总结出最佳的 超细条件，制备出平均粒径为140 nm 的电气石超细粉体，并可实现工业化连续生产。 关键词 超细电气石 制备因素 湿法研磨 研磨时间 粒度 TD97 A 1000-8098(2010)05-0021-03 中图分类号： 文献标识码： 文章编号： Effect of Various Preparation Factors on Particle Size of Superfine Tourmaline Powder * Zhu Aixia Guo Shidong (School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu 214122) Abstract Tourmaline has both piezoelectric and pyroelectric effects, which give it some unique electrical properties. Superfine powders of tourmaline have extensive applications in the fields of environmental protection, air purification, as well as water treatment. The raw tourmaline powder (2.24 µm) was dealt with by sand milling in different conditions, such as different dispersant, dosage of dispersant, solids concentration and grinding time. Through the analysis of the particle size, the optimum conditions of superfine tourmaline were ascertained, the particle size of superfine tourmaline powder was 140nm, and a continuous production process could be realized. Key words superfine tourmaline preparation factor grind with wet-process grinding time particle size 电气石是一种以含硼为特征 的铝、纳、铁、钙、镁