光纤通信系统的仿真分析_optisystem.docVIP

光纤通信系统的仿真分析(Optisystem仿真附程序) 编辑：admin 来源：毕业设计论文网 浏览指数：1099 收藏本页： 录入时间：2009-12-16 16:38:58 摘 要 光纤通信系统的计算机仿真, 是对此类系统进行规划设计、可行性论证以及研制新型系统的重要手段,可用于对已设计的光纤传输系统在硬件实现之前进行性能评估和可行性论证, 可节约大量时间和经费; 同时在分析中可随时改动参数值, 便于理论研究。要建立一个方便可靠的光纤通信系统的仿真平台, 有赖于对系统各模块物理特性进行推导和归纳, 建立起系统各模块的数学模型。 建模的基本原则是既要能描述器件的特性, 具有一定的精确度, 同时又要兼顾计算的复杂度, 要有较快的分析速度。同时, 还应能根据研究目的的不同, 调整模型的选取。在对光纤通信系统分析的基础上〖资料来源:毕业设计论文网 〗利用Optisystem仿真软件，建立了高速大容量光纤系统的仿真模型，得到了高速光纤通信系统特性与激光器的调制频率、偏置电流的关系，光纤的损耗和色散以及其他参数的仿真结果。并对传输速率为10Gb/s的光纤通信系统进行仿真设计和分析。 关键词 光纤 仿真 optisystem 模型 误码率 信道 simulation analysis of Optical fiber communication system Abstract Optical fiber communication systems computer simulation is of such systems planning and design, feasibility study and development of new types of systems important means can be used to have been designed optical transmission systems in hardware prior to the performance evaluation and feasibility study, Can save a lot of time and funding, while in the analysis parameters can be changed at any time, for theoretical research. To establish a convenient and reliable optical fiber communication system simulation platform, the system depends on the physical characteristics of each module is derived and summarized, and establish a system of mathematical models of each module. Modeling the basic principle is not only describes the characteristics of the device, have a certain precision, and also take into account the complexity of calculating, a relatively fast pace of. At the same time, according to research purposes should also be different, adjust the model selected. In the optical fiber communication systems analysis, based on the use Optisystem simulation software, a high-speed large-capacity optical fiber systems simulation model, be a high-speed optical fiber communication system with the characteristics of the laser frequency modulation and bias current relationship, fiber The loss and dispersion, and other paramet