麻秆芯纤维发泡缓冲包装材料的制备工艺.pdfVIP

31 3 Vol. 31 N o. 3 2011 6 JOURNAL OF SOUTHWE ST FORESTRY UN IVERSITY Jun. 2011 do:i 10. 3969/ j. issn. 2095- 1914. 2011. 03. 01 何 蕊 陈太安 戈应仓 (, 650224) : 利用大麻秆芯纤维为植物纤维原料制备缓冲包装材料, 探讨麻秆芯纤维添 量胶黏剂发泡 剂和填料 4 个工艺因素对发泡体性能的影响, 并利用外观特征密度和回弹率 3 个性能指标对发泡 体进行综合评价, 筛选出的优化工艺条件为: 麻秆芯纤维添 量为 300%, 胶黏剂用量为 200%, 发泡剂用量为 15% , 填料用量为 100% 优化工艺条件下制备的发泡材料外观量化评分为 9, 密 3 度为 0151 g /cm , 回弹率为 322%, 初步达到缓冲包装材料的要求 : 大麻秆芯; 发泡材料; 密度; 外观; 回弹率 : S 84 : A : 2095- 1914( 2011) 03- 00 3- 04 Manufacturing Technology of Foam ing Buffer Packaging M aterial Prepared from Cannabis sativa Core Fiber HE Ru,i CHEN Taian, GE Y ingcang ( Faculty ofWood Science and T echnology, Southw est Forestry University, Kunm ing Yunnan 650224, China ) Abs tract: The foam ing buffer packaging materialw as expermi ented to be m ade of the Canna bis sativa stem core fiber. The influence of the proportion of fourmajor raw material components i. e. , the amount ofC. sativa stem core fiber, glue dosage, dosage of foam ing agent and the additive dosage applied, upon the properties of foa m ing materialw as studied, and the properties of the foam ing materialw ere comprehensively evaluatedw ith appear ance, bu lk density and shape recovery rate indexes. The resu lts show ed that the optmi ized raw material proportion for the processing was 300% of fiber, 200% of glue, 15% of foam ing agent and 100% of additive. The foa m ing buffer packaging materialmanufactured by the optmi ized processing technology w as assessed that the appear 3 ance w as scored as 9 points, the bulk densityw as 0151 g /cm and the shape recovery rat