外文翻译--PLC的特点.doc

PLC Characteristic PLC English full title Programmable Logic Controller, Chinese full title as the programmable logical controller, the definition is: One kind of digital operation operations electronic system, for designs specially in the industry environment application. It uses a kind of programmable memory, uses in its internally stored program, the actuating logic operation, the sequential control, fixed time, counting and arithmetic operation and so on face users instruction, and through digital either simulation type input/output control each type machinery or production process. PLC characteristic: 2.1 reliability is high, antijamming ability. depending on the nature is the electric control equipments essential performance. Because PLC uses the modern large scale integrated circuit technology, used the strict technique of production manufacture, the internal circuit has adopted the advanced antijamming technology, had the very high reliability. For example the Mitsubishi Corporation produces F series PLC mean time between failure reaches as high as for 300,000 hours. Some use redundancy CPU PLC average trouble-free operating time is longer. From the PLC outside the aircraft electric circuit, uses the PLC constitution control system, compares with the same level scale following the electrical pick-off system, the electrical wiring and the switch contact reduced to several hundreds even several thousands 1, the breakdown also greatly reduces. In addition, PLC has the hardware fault self-measuring ability, presents when the breakdown may send out the warning information promptly. In the application software, the application may also enroll the periphery components breakdown from the diagnostic program, causes in the system also obtains the breakdown besides the PLC electric circuit and the equipment from the diagnosis protection. Thus, the overall system has the extremely high reliability also not to feel strange. 2.2 necessary complete, the function is perf