外文翻译-一个工艺设计的制造资源基于聚类的造型方案英文版.pdf

Int J Adv Manuf Technol (2008) 38:154– 162 DOI 10.1007/s00170-007-1075-z ORIGINAL ARTICLE A clustering-based modeling scheme of the manufacturing resources for process planning Huan-Min Xu Dong-Bo Li Received: 12 December 2006 / Accepted: 30 April 2007 /Published online: 14 June 2007 # Springer-Verlag London Limited 2007 Abstract Process planning determines how a product is to be preparations and the foundation of all production activities. manufactured and, therefore, is one of the key elements in the In the past, the process planning activity has traditionally been manufacturing process. The basic crux of computer-aided experience-based and has been performed manually by human process planning (CAPP), however, is the diversity of process planners without computer involved in it. Manual manufacturing background and the complexity of process process planning, however, involves some problems: for planning. Since the process plans are generated on demand instance as lack of skilled planners, inconsistency of process with the manufacturing resources on a shop floor, modeling plans due to variability among the planners ’ judgement and method of the manufacturing resources is one of most im- experience, low efficiency in plan generation, slow response to portant issues in computer-aided process planning. Hence, the the changes in practical manufacturing environment, and so major objective of this research is to create a clustering-based on. To alleviate these problems, a computer-aided approach modeling scheme of the manufacturing resources for process has been taken. planning. This modeling scheme combines clustering method Since the idea of using computers in process planning with averaging method so as to reasonably partition and activity was discussed b