外文翻译--浅谈带式输送机的拉紧装置.doc

Discussion about pull installation of belt conveyer Belt conveyer also claimed rubber belt conveyor, which is called leather belt in the Produce scene, is the continuous facility for transporting of the common enterprise of factories and mines. It is widely used under the well of coal mine, particularly extensively. The major parts of belt conveyer include conveyer belt, actuating device, bearing roller, cylinder, frame, tension station, brake, supplementary equipment as well as electromechanical protective device and so on. When designing belt conveyer, first, should determine original enumerated data, such as the expected productivity, conveyer transport line picture, the way of giving material and discharge way by working condition and the installation feature of conveyer as well as the physical mechanical performance of transportation stock and so on; And in the design cacula- tion of type selecting need to select related parameter reasonably, for example band- width, belt speed and wraps angle of the driving pulley, the operation resistance coefficient of parts , make them close to actual operation state worth in order to raise economic benefits and the comprehensive technology of belt conveyer. Since belt conveyer is to lean conveyer belt, the friction with drive pulley transmits haulage , therefore tension station can be designed with definite parameter according to the requirement for tension in the operation of conveyer belt which including characteristic, installation location, tension adjusting range and the type of tension station and so on. Tension station can directly affect the performance of belt conveyer as its performance of essential important composition part of belt conveyer. In belt conveyer system, the main effect of tension station has the following: （1）Guarantee conveyer belt’s split of driving pulley have proper tension in order to prevent conveyer belt from dozening slippery. Belt conveyer depend on the friction between support convey