板式转换层支撑体系的分析方法及其工法优化.pdfVIP

学科代码：56030 学科代码： 板式转换层支撑体系的分析方法及工法优化 朱慎如，邓思华，郭鹏杰 （北京建筑工程学院土木与交通学院，北京 100044） 摘 要：本文提出了转换层的施工仿真计算模型，首次考虑下层已浇筑混凝土楼板的承载力对模板支撑体系的有利作 用。通过对一地下两层、首层为板式转换层的多层框架结构施工过程的仿真分析与工法优化，形成既保证施工安全 又相对经济合理的施工技术，且验证了该工法的科学性、合理性和可操作性。结果表明：考虑了荷载竖向传递规律 的转换层支撑体系，其优化设计及施工方法不但可以让楼板充分发挥自己分担部分施工荷载的作用，而且可以使模 板与脚手架得到充分周转，使用起来更加安全可靠、经济合理。此论文为今后板式转换层的综合施工提供了参考， 也可为模架支撑体系的理论研究提供可借鉴的经验。 关键词：板式转换层;结构设计;施工技术;工法优化 中图分类号：TU318;TU355 文献标识码：A 文章编号：A036 Analysis and optimization methodology of slab transfer floor bracing system ZHU Shen-ru, DENG Si-hua ，GUO Peng-jie （School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture Beijing 100044 , China ） Abstract: The research about the construction of the transfer floor simulation model has been proposed, For the first time, taking the bearing capacity of the concrete storey which has been poured into account the beneficial effect of bracing system, Through a two-storey underground and first floor transition story, which were optimized for multi-layer plate frame construction process simulation analysis method. Construction is to ensure the formation of a relatively safe and economical construction technique, and is verified that it was a scientific, rational and feasible method. The results showed that: the optimization design and construction methods of the transfer floor bracing system, which has considered the vertical load transfer law ,could not only enables the floor to play its role fully to share part of the construction load; but also enables the scaffold template fully working to make it more safer 、 reliable, and reasonable economic. This paper provides a comprehensive reference fo