C60超高层泵送混凝土配合比设计.pdf

2015 年第3 期 混凝土 与水泥制 品 2015 No.3 3 月 CHINA CONCRETE AND CEMENT PRODUCTS March C60 超高层泵送混凝土配合比设计 1 2 3 1 陈连发 陈 悦 陆 洋 王辰 （1. 林化工学院材料科学与工程学院，132022；2.中国电器科学研究院有限公司威凯检测家电事业 部压缩机工程部，广州510663 ；3.冀东水泥城建混凝土有限公司， 林132002） 摘 要 将优质山砂与机制砂混合 采用Ⅱ级粉煤灰及S95 Ⅱ级磨细矿粉作为矿物掺合料配制C60 高性能泵送 混凝土。 混凝土的原材料选择、和易性、经时损失、压力泌水和抗压强度等方面进行研究 通过配合比优化设计 配 制出了C60 超高层泵送混凝土。 这不仅解决了高强度等级混凝土粘度与可泵性相矛盾的问题 而且解决了扩展度 与粘度的经时损失尤其是泵送损失问题。 阐述了C60 超高层泵送混凝土的配制关键技术 成功将C60 混凝土一次 泵送至430m 高度。 同时 提出了高强度等级超高层泵送混凝土可泵性评价的关键技术指标 可供有关技术人员参 考。 关键词 超高泵送混凝土；可泵性；粘度；泵送损失；经时损失 Abstract: High quality hill sand and mechanical sand are mixed, C60 high performance pumping concrete is pre- pared by using grade II fly ash and grade S95 II levigating slag as mineral admixtures. Fly ash and slag double dosage technology are used to prepare C60 high strength and high performance concrete. Studying from the concrete raw material selection, workability, the loss, pressure bleeding, compressive strength and so on, C60 super high-rise pumping concrete is prepared by the optimization design of mixture ratio. This can not only solve the contradiction between viscosity and pumpability, but also solve the time loss problems of extension degree and viscosity, especially the pumping loss. The key technology of C60 super high-rise pumping concrete preparation is presented, pumping C60 concrete to a height of 430m. The key technical indexes of high strength and super-rise pumping concrete pumpability evaluation is put forward, which is available for related technicians. Key words: Super-rise pumping concrete; Pumpabil