超大型圆筒阀的预装及工艺控制.pdfVIP

超大型圆筒阀的预装eL_T-艺控制 廖劲凯 (中国水电十四局有限公司机电安装分公司，云南 昆明650032) 摘 要：阿海水电站5台机组均采用外径10．004m、高2633．5nun的圆筒阀作为水轮机主阀，其预装质量直接影响 机组的安全稳定运行。着重介绍了从圆筒阀焊接到圆筒闵与接力器预装、上下密封安装的全过程及工艺控制。阿海 水电站圆简阀预装只进行了一次圆筒阀与顶盖整体吊入机坑，预装质量良好。 关键词：大型筒阀；预装；工艺控制；阿海水电站 Pre-installafionof ValveandItsProcessControl HugeCylinder Liao Jinkai 14 fMechanicalandElectricalInstallationBranch Bureau 650032，Yunnan，China) Company，SinohydroCo．，Ltd．，Kunming five in use valveasitsmain external Abstract：Allofthe turbinesAhai Station which，the Hydropower cylinder valve，in diameterof valveis10．004mandthe is2633．5mill．The of valvehasserious cylinder height pre-installationcylinder quality onthesafeandstable ofunit．Thewhole and controlof valve，from impact operation pre—installationprocedureprocess cylinder the ofvalve tothe ofvalve andservomotorandtheinstallationof andlower welding body pre-installationbody upper seal，are introduced the in of valveAhai combinationof valve herein．During cylinder HydropowerStation，the cylinder pre-installation andheadcover into the once showsthatthe is onlyhangs pit time，which pre-installationqualitygood． Key control；Ahai Station Word芷hugecylindervalve；pre-installation；processHydropower 中图分类号：TV732。7(274)文献标识码：B 文章编号：05