混凝土细观分析中随机多边形骨料生成方法.pdf

第26 卷 第4 期 建筑科学与工程学报 Vol. 26 No. 4 2009 年12 月 Journal of Architecture and Civil Engineering Dec. 2009 : 167 2049( 2009) 侯宇星, 王立成 ( , 116024) : 提出了一种以改进面积判别 则和凸多边形生成方式为基础的二维混凝土骨料随机生成算 法通过对骨料延伸条件的改进和定点位置条件的限定, 改进了程序的可执行性, 提高了随机多边 形骨料的生成效率; 通过轴向拉压计算实例对比分析了圆形和多边形骨料对于混凝土试件单轴抗 拉抗压力学性能的影响结果表明: 圆形骨料试件抗拉抗压能力略高于多边形骨料试件, 骨料形 状对混凝土试件拉压力学性能数值模拟结果的影响很小 : 混凝土; 随机多边形骨料; 二维模型; 数值模拟; 细观分析; 破坏形态 : T U528 : A Generating Method of Random Polygon Aggregate in Mesoscopic Simul ation of Concrete H OU Yuxing, WA NG Licheng ( School of Civil and Hydraulic Engineering, Dalian University of T echnology, Dalian 116024, Liaoning, China) Abstract: An improved generating method of random concrete aggregates in 2D area based on area criteria and generating pattern w as proposed. T hrough improving aggregate extension condition and limiting the condition of special points location, the generation efficiency of random polygon aggregates w as raised, and the computational program w as subsequently improved. Finally, through comparing the calculation examples under axial tension and compression, the influences of mechanical properties on concrete specimens under uniaxial tension and compression w ere analyzed by comparing the different shapes of aggregates, such as circular aggregate and polygon aggregate. The result show s that the concrete specimens with circular aggregates have slightly higher strength than that of polygon aggregates, w hich also indicates that shape of aggregate has little effect on the tensile and compressive mechanical properties of concrete specimens in terms of the numerical simulation results. Key words: concrete; random