Battery Application Evaluation.pptVIP

City university of Hong Kong Industrial Attachment Scheme(2002) Training program for students Training company: Techtronic Industries Co,Ltd. Battery application evaluation Basic construction of Ni-CD and Ni-MH Battery. Evaluation of Battery charging and discharging. Evaluation of Battery application. Testing methods for the battery. Problems related to “0V” battery. Switch problem analysis Component construction of switch A, B+, B, C grade switch (Baicheng) Principles of switch operation on-off switch two speed switch variable switch Evaluation of switch characteristics Evaluation of switch application failure of variable speed switch Basic construction of Ni-CD Ni-MH battery For BYD’ s Ni-CD battery, consist of positive and negative plates, separator, alkaline electrolyte metal case,e.t.c. For BYD’ s Ni-MH battery, consist of a positive plate containing nickel hydroxide as its principle active materials, a negative plate mainly composed of hydrogen – absorbing alloys, a separator made of find fibers, an alkaline electrolyte  Ni-CD battery vs Ni-MH battery Ni-MH is environmental friendly, but Ni-CD is not Ni-MH batteries have approximately double the capacity compared with Ni-CD batteries. Ni-MH is less tolerant of overcharge and requires control of cut off of the charge High rate performance of Ni-MH is not good as Ni-CD. Ni-MH is more expensive than NI-CD. Evaluation of battery discharging Voltage level during discharge Current drain of discharge Temperature of battery during discharge Voltage level during discharge Evaluation of battery charging the battery voltage during charging the battery pressure during charging the battery temperature during charging Evaluation of battery application: Testing methods for the battery 1.Voltage and internal resistance test Test the income voltage of battery. Charge battery at 1CmA for – delta V = 15mV/cell and rest for 1 hou