Numerical Analysis of a BeamEnergySpread Monitor Using MultiStripline Electrodes.pdfVIP

NUMERICAL ANALYSIS OF A BEAM-ENERGY-SPREAD MONITOR USING MULTI-STRIPLINE ELECTRODES * T. Suwada , High Energy Accelerator Research Organization (KEK) 1-1 Oho, Tsukuba, Ibaraki 305-0801, Japan Abstract the following method can be applied to not only measuring the energy spread, but also to measuring the A beam-energy-spread monitor is under development in transverse spatial structure of the beam. order to control and stabilize the energy spread of high- 0 current single-bunch electron beams for producing a 2 MULTIPOLE ANALYSIS 0 sufficient number of positrons. The author has proposed a 0 new monitor using multi-stripline electrodes in order to The electromagnetic field generated by relativistic 2 charged beams inside a conducting duct is almost boosted reinforce this purpose. This report describes the basic p design of the monitor based on a numerical analysis. The in the transverse direction to the beam axis due to Lorentz e contraction. This phenomenon shows that if the wall loss analysis result shows that the resolution of an energy- S of the image charges is negligibly small, the spread measurement is expected to be less than 0.3% for 9 nominal operation conditions.