CAN BASED DISTRIBUTED CONTROL SYSTEM MODELING USING UML.pdfVIP

CAN BASED DISTRIBUTED CONTROL SYSTEM MODELING USING UML Jifi Kotzian, Vilem Srovnal VSB - Technical University of Ostrava Faculty of Electrical Engineering and Computer Science Department of Measurement and Control 17.listopadu 15,708 33 Ostrava-Poruba, Czech Republic jiri.kotzian@vsb.cz, vilem.srovnal@vsb.cz Abstract- This work presents model and methodology symmetric leading twisted pair - shielded , non- used for development distributed control system symmetric leading coaxial cable , optical cable or based on industrial network CAN. wireless communication as communication medium. Net’s topology determines stations connection, Main 1 Introduction representatives are bus, star, tree and circle. Communications protocols determine method of access Present tendency of developing control systems is rising to communication medium. Protocols can be based on degree of distribution parts of the system. Present conflict, flag or deadline. methods of designing used in routinejob are especially based on the practice with existing resources. The Industrial nets ensures fail-safe communication in multiply speed control system is used to satisfy reliably distributed control systems for date measurement, response of the system in time critical states. There are actuators control and data exchange. This must be some producers which supply some tools to design and archive in short time in wide area as are buildings, stores theoretically testing of systems. This possibility is and production lines. Each communication standards limited on resources of given developer. So we can not differ in communication medium, bit rate, access verify behavior of control system build-up from control, security degree or maximal number or different developer’s resources. With this time connected stations. Main represen