MATERIAL LABORATORY procedure英文资料.docVIP

Purpose 目的 Establishing material laboratory is to inspect and verify the material to see if it achieves the requested performance index. 建立材料实验室是为了检查和验证材料是否达到要求的性能指标。 Provide guideline for formula design and production through material test. 通过对材料的测试指导配方设计和生产。 Scope 范围 This document is applicable for all materials of producing IC tray. 此文件适用于所有生产IC托盘的材料。 References 参考资料 XX-MTDS-001 Material Technical Data Sheet 材料技术数据表 XX-03-1048 Work Instruction For Izod Notched Impact Strength Test 悬臂梁冲击测试作业指导 XX-03-1049 Work Instruction For Tensile And Flexural Properties Test 拉伸与弯曲性能测试作业指导 XX-03-1050 Work Instruction For Moisture Content Test 水分含量测试作业指导 XX-03-1051 Work Instruction For Density Test 密度测试作业指导 XX-03-1052 Work Instruction For Melting Flow Index Test 熔融指数测试作业指导 XX-03-1053 Work Instruction For Heat Deflection Temperature Test 热变形温度测试作业指导 XX-03-1054 Work Instruction For Contractibility and Baking shrinkage Test 材料成型收缩率及焙烤收缩率测试作业指导 XX-03-1055 Work Instruction For Surface Resistivity Test 表面电阻率测试作业指导 XX-03-1056 Work Instruction For Fiber Content Test 纤维含量测试作业指导 Material/Equipment 检验设备和材料 Injection Machine(Appointed ) 注射机（指定专用注射机） Mold (The special injection mold) 模具（专用样条模具一套） Material Mechanical Test Machine(PK-105B) 万能拉压力材料实验机 Izod Notched Impact Strength Test Machine(PK-806) 悬臂梁冲击实验机 Moisture Analyzer(MS-70) 水分测定仪 Electronic Densimeter(DH-300) 电子比重仪 Melt Flow Indexer(SRZ-400D) 熔融指数实验机 HDT Tester 热变形温度实验机 Precision Oven 精密烤炉 Surface Resistivity Tester 表面电阻测试仪 Muffle Furnace(SX-4-10) 马弗炉 Clamp(Tensile And Flexural Test) 夹具（拉伸、弯曲测试） Vernier Caliper