L293D电机驱动模块.pdfVIP

L293D ® L293DD PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repeti- tive) PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL 0 INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES SO(12+4+4) Powerdip (12+2+2) ORDERING NUMBERS: DESCRIPTION The Device is a monolithic integrated high volt- L293DD L293D age, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power tran- sistors. To simplify use as two bridges each pair of chan- nels is equipped with an enable input. A separate The L293D is assembled in a 16 lead plastic supply input is provided for the logic, allowing op- packaage which has 4 center pins connected to- eration at a lower voltage and internal clamp di- gether and used for heatsinking odes are included. The L293DD is assembled in a 20 lead surface This device is suitable for use in switching appli- mount which has 8 center pins connected to- cations at frequencies up to 5 kHz. gether and used for heatsinking. BLOCK DIAGRAM July 2003 1/7 L293D - L293DD ABSOLUTE MAXIMUM RATINGS Symbol Parameter