仿生树状钢结构柱设计研究王忠全.pdfVIP

26 4 Vol. 26, No. 4 2010 8 Structural Engineers Aug. 2010 1, * 2 1 王忠全 陈 俊 张其林 ( 1. , 200092; 2. , 110101) 首先阐述了树状柱结构在国内外建筑结构中的应用状况, 然后 别对树梢有无支撑的树状柱 杆件的计算长度系数取值树状结构传力路径以及 枝数量进行了论述, 并给出了相应的 析结果与设 计参数建议最后, 通过实际的树状柱设计工程实例, 结合前述理论 析原理, 给出了树状柱的设计计 算结果及设计中的关键问题, 并且进行了相应的 析总结, 为空间钢结构采用树状柱结构形式提供了 参考 结构仿生, 树状柱, 计算长度, 钢结构 Research on Design of Dendritic Columns in Bionic Steel Structures 1, * 2 1 WANG Zhongquan CHEN Jun ZHANG Q ilin ( 1. Departm en t of Bu ilding Eng ineering, TongjiUn iversity, Shanghai 200092, Ch ina; 2. China A irport Construction Group Corporation of CAAC, Beijing 110101, Ch ina) Abstract The application status of dendritic columns in bu ild ing structures at domestic and abroad w as introduced. The effective length, transfer path of force and the branch number of dendritic columns w as discussed respectively for the treetop braced or not. Some suggestions of reasonable grade bracing in dendritic columns and the correspond ing design parameters w ere given. Finally, through an actual design project example, the calcu lation results and key points of the dendritic column design process w ere presented. The corresponding analysis and design experiences of dendritic columnsw ere listed as the reference. K eywords bion ics structure, dendritic column, effective length, spatial steel structure , , 1 / 0, 1 , , [ 1- 3] ( F.