钢板_溷凝土组合梁的非线性有限元分析.pdfVIP

第26 卷第4 期 Vol.26 No.4 工 程 力 学 2009 年 4 月 Apr. 2009 ENGINEERING MECHANICS 105 文章编号：1000-4750(2009)04-0105-08 钢板-混凝土组合梁的非线性有限元分析 * 赵 洁，聂建国 (清华大学土木工程系结构工程与振动教育部重点实验室，北京 100084) 摘 要：以8 根钢板-混凝土组合梁的试验研究为基础，采用有限元软件ABAQUS 建立了钢板-混凝土组合梁的非 线性有限元模型，模拟了构件加载的全过程和受弯破坏、钢板剥离破坏等形态下构件的受力性能。模型中考虑了 材料非线性、栓钉的荷载-滑移曲线和栓钉的断裂模型等。计算结果与试验吻合良好。对影响钢板-混凝土组合梁 性能的主要参数进行了分析，包括钢板厚度、钢板长度、栓钉间距等。分析结果表明：设计时可以通过对栓钉的 抗剪承载力进行折减来保证钢板-混凝土组合梁能够达到弯曲破坏形态。 关键词：钢板-混凝土组合梁；非线性；有限元分析；栓钉；滑移模型 中图分类号：TU398+ .9 文献标识码：A NONLINEAR FINITE ELEMENT ANALYSIS OF STEEL PLATE-CONCRETE COMPOSITE BEAMS * ZHAO Jie , NIE Jian-guo (Department of Civil Engineering, Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Tsinghua University, Beijing 100084, China) Abstract: Based on the experimental study of eight Steel Plate-Concrete Composite (SPCC) beams, the numerical studies on the entire process of the loading and other structural behaviour in the flexural failure and steel plate bonding failure of SPCC beams are conducted in the platform of ABAQUS. The nonlinear behavior of materials, load-slip behavior and fracture model of studs are taken into account in the analysis. The results of the finite element analysis are found to be in good agreement with the experimental results. The main parameters affecting the behavior of SPCC beams are analyzed, including the thickness and the length of steel plate and the space between studs, etc. The result shows that the ultimate shear strength of studs should be reduced in design