秦山三期核级树脂筛选和相关技术指标优化研究.pdfVIP

SCREENING AND OPTIMIZING OF NUCLEAR GRADE RESIN IN TQNPC ABSTRACT The objective of the research program is to optimize the process of TQNPC nuclear grade resin to be more safety and more economic, and the optimized process will be carried out and tested in TQNPC systems. There are two units of TQNPC , which includes 15 purification systems with 36 resin bed used nuclear grade resin. The purification system include moderator purification system, primary heat transport purification system, shield cooling system, liquid zone control system, spent fuel bay cooling and purification system, D2O cleanup system, and so on. The total nuclear grade resin loaded in the two 3 3 units of TQNPC is 14 m . About 15 m radioactive waste resin is produced in the two units every year , which is stored in the waste resin tanks. A lot of money will have to be spent to disposal the waste resin in the future. C-14 produced in moderator system and primary heat transport system is the major source of radioactive gas discharged from nuclear power plants to environment. C-14 activity can be reduced when it goes through resin bed since C-14 is mostly adsorbed by the resin and retain in it. When C-14 is absorbed to saturation, the resin will lost its capacity. Optimizing nuclear grade resin physical and chemical performance can prolong resin service time and minimize radwaste amount. Nuclear grade resin was optimized through a series tests such as antioxidation performance test, resistance thermal performance test, antiseperati