电磁屏蔽刨花板合板的制备及其性能探究.pdfVIP

摘 要 电磁屏蔽刨花板/胶合板属于木基电磁屏蔽复合材料范畴，是防止外部电磁 辐射干扰和电磁信号泄露的新一代绿色室内功能装修材料,本研究对电磁屏蔽刨 花板/胶合板的制备及性能进行分析，结果如下： 1.镀铜刨花板的最优制备工艺为施胶量为12%、热压温度为80℃、板材密度 3 为 1.0g/cm ，在该工艺下制的的板材弹性模量为2992MPa，静曲强度为43MPa， 24h 吸水厚度膨胀率为4.9%，平均电磁屏蔽效能值为53.66dB。 2.镀镍刨花板的最佳制备工艺为施胶量为12%、热压温度为80℃、板材密度 3 为1.0g/cm ，在该工艺下制的的板材弹性模量为2810MPa，静曲强度为32.4MPa， 24h 吸水厚度膨胀率为4.5%，平均电磁屏蔽效能值为43.55dB。 2 3.镀铜/镍单板胶合板的最佳制备工艺为施胶量为 320g/m 、热压温度为 80℃、压力 1.7MPa，在该工艺下制的的板材弹性模量为 3852MPa，静曲强度为 48.5MPa，胶合强度为1.13MPa，镀铜单板胶合板的平均电磁屏蔽效能为55.83dB dB，镀镍单板胶合板的平均电磁屏蔽效能为49.13dB。 关键词：电磁屏蔽；镀铜/镍；复合材料；电磁屏蔽效能 Study on Preparation and Properties of the Electromagnetic Shielding Particleboard/Plywood Abstract Electromagnetic shielding particleboard/plywood blongs to one of the wood-based electromagnetic shielding composites, it is a new generation of green interior decorating function materials of preventing the external electromagnetic radiation interferences and electromagnetic signal leakaging, the paper studys on the Preparation and Properties analysis of electromagnetic shielding particleboard / plywood, the results are as follows: (1) The optimal preparation of copper shavings wood-based panels showed by the experiments are the content of adhesive amount at 12% , content of hot-pressing 3 temperature at 80°C, the sheet density at 1.0g/cm , Under this process, the elastic modulus of the elasticity is 2992Mpa,the bending strength is 43MPa the thickness swelling after 24h is 4.9% and the average electromagnetic shielding affect is 53.66dB. (2) The op