履带拖拉机（中央传动及转向离合器）.docVIP

摘 要 中央传动用来增加传动系的传动比,以达到减速增扭的目的,通常还用来改变转矩的传递方向,使转矩从纵置的变速箱输出轴传递给横置的中央传动两侧输出轴。 中央传动应有适当的传动比,以保证拖拉机具有良好的牵引性与经济性;结构应紧凑,以减小后桥尺寸和和质量,保证后桥有足够的离地间隙；齿轮装置应有足够的承载能力和支承刚度,如系锥齿轮副,则还应便于调整。 中央传动的齿轮形式目前主要有圆柱齿轮和圆锥齿轮。圆柱齿轮结构简单,加工较容易,在传动时不致产生轴向力。但仅适用于采用横置变速箱的拖拉机。而圆锥齿轮应用则较为广泛。 履带拖拉机在行使过程中，需要经常改变行驶方向，这就需要有一套能够按照司机意志来改变或恢复拖拉机行驶方向的专设机构，它将司机踩下转向离合器踏板的动作转变为车轮的偏转动作，这就是所谓的转向系统。转向性能是保证车辆安全，减轻驾驶员劳动强度和提高作业效率的重要因素。 转向离合器转向系统由于构造简单，制造方便，维修容易，在拖拉机上广泛采用。它具有转向半径小，直线行驶性好等优点。但由于传递的转矩较大，只得采用多片式离合器，而多片式离合器分离彻底性比较差。这对转向离合器来说，除了使摩擦面的磨损略微增大外，对整机性能没有太大影响，不像主离合器分离不彻底会造成换档困难。 关键词：中央传动，转向离合器，锥齿轮，转向系统 谢谢朋友对我文章的赏识，充值后就可以下载说明书，我这里还有一个压缩包，里面有相应的word说明 书和CAD图纸（零件图、毛坯图、夹具体、装配图）及机械加工工艺卡片。下载后请留上你的邮箱号或QQ 号或给我的QQ留言：359615001。1154454794我可以将压缩包送给你。欢迎朋友下次光临！ 352 TRACKED TRACTOR（CENTRAL TRANSMISSION AND STEERING CLUTCH DESIGN） ABSTRACT Central spread to use to increase to spread to move to fasten of spread and move ratio, the purpose that to attain to decelerate to increase to twist, usually return to use to change the torque to deliver the direction, make torque place become soon the box outputs the stalk to deliver to horizontal place central to spread to move the two sides exportation stalk. Central spread to move and should have appropriate of spread and move ratio, with the assurance that the tractor has to lead the sex and economy goodly; structure should tightly packed, after to let up the bridge size and and quantity, the assurance is behind the bridge has to leave a ground of cleft enough;The wheel gear device should have the enough loading ability and pay to accept just degree, return if department the bevel gears is vice, should easy to adjustment. Central spread the dynamic wheel gear form to mainly have the cylinder wheel gear and the bevel gearses currently.The cylinder wheel gear structure is simple, processing to compare easily, produce the stalk toward dint unlikely while spread move.But be applicable to the adoption only horizontal place to become soon the tractor of the box.But the cone wheel gear the appli