数字芯片功能检测电路设计.docVIP

数字芯片功能检测电路设计 学院名称： 专 业： 班 级： 姓 名： 指导教师姓名： 指导教师职称： 2012年 6 月 数字芯片功能检测电路设计 摘要：为了保证数字集成电路的功能和性能参数符合技术要求 关键词：数字芯片；； Design of Digital Chips’ Functions Detection Circuit Abstract: To ensure the functions of digital integrated circuits and performance parameters meet the technical requirements, this paper designs a digital chips’ functions detection circuit of a MCS-51 as the core with the host computer through the serial communications, through the computer-operated, which controlled by single chip microcomputer. The system can make functions tests in TTL74 series digital chip frequently-used. The system mainly consists of two parts of the upper and lower machine. The upper computer consists of user interface and communication modules, communicating via RS-232 standard interface. User interface written by VB language, to send a test command and displays the test results. Single chip microcomputer as the core of the hardware of lower machine, it constis of power module, display module, key module, etc.Software part consists of interrupt system, detection circuit, display circuit, etc. The test results show that this design is able to detect the quality of models and functions of the chip, and it has a low cost, ease of operation, high accuracy and test speed. Keywords：Integrated circuit testing; Digital chips; Upper Computer; Single chip microcomputer; Serial communication 目 录 前 言 1 第1章 课题总体设计 2 1.1 设计要求 2 1.2 硬件设计 2 1.3 软件设计 3 1.4 软件工具介绍 4 1.4.1 Protel 99 SE 4 1.4.2 Keil μVision 2 4 1.4.3 STC-ISP 5 第2章 系统硬件设计 7 2.1 单片机模块设计 7 2.2 电源模块设计 9 2.3 继电器模块设计 10 2.4 按键输入电路模块设计 11 2.5 数码管显示电路模块设计 12 2.6 LED指示电路模块设计 12 2.6 RS232串口通信电路模块设计 13 第3章 系统软件设计 15 3.1 系统软件需求分析 15 3.2 各功能模块软件设计 1