《蒸汽热处理对杉木表面接触角的影响（英文版）》.pdfVIP

Agricultural Science Technology, 2014, 15(1): 127-131 Copyright 訫 2014, Information Institute of HAAS. All rights reserved Forestry Effects of Steam Heat Treatment on the Surface Contact Angle of Chinese Fir 1,2 1,2 鄢 1 1 1 1 Wei GAO , Jianju LUO , Shiheng SHI , Ruce LI , Pei LU , Xi GUO 1. Forestry College, Guangxi University, Nanning 530004, China; 2. Guangxi Wood and Wood Products Quality Supervision and Test Station, Nanning 530004, China Abstract The aim of this study was investigate the effects of heat treatment on the 蒸汽热处理对杉木表面接触角 contact angle of Chinese fir, and the indicators affecting the change of contact an鄄 的影响 gle change. It was determined that the duration of treatment had significant effect ， ， on the change curves of contact angle of Chinese fir wood due to the change 高 伟 1 2 ，罗建举 1 2* ，石世亨 1，李 荣册 1，卢 佩 1， curves of contact angle became more centralized and orderly after the specimens 郭 玺 1 1. 530004 （ 广西大学林学院 ，广西南宁 ； heat treated at 180 ℃ . Compared with the untreated wood, the contact angle in鄄 2.广西壮族自治区木材及木制品质量监督检验 creased from 51° to 124° after 4 h treatment, and hydroxyl absorbance of hy鄄 drophilic functional groups decreased from 2.08 to 1.63, while carbonyl absorbance 站 ，广西南宁 530004） from 0.92 to 0.62. The