TheApplicationofAutomatedPlanningtoMachineTool.PDFVIP

The Application of Automated Planning to Machine Tool Calibration S. Parkinson1 A. P. Longstaff1 A. Crampton2 P. Gregory2 1Centre for Precision Technologies 2 Department of Informatics School of Computing and Engineering University of Huddersfield, UK ICAPS, 2012 Introduction A machine tool is a mechanically powered device used for manufacturing components. Machine tools are typically designed for optimum manufacturing of a small range of components. Hence the variety of different machines. Optimised in terms of size, material and power. Introduction The demand to manufacture parts to an ever increasing degree of accuracy has resulted in the requirement for achieving the best possible accuracy from machines. Therefore, calibrating the machine is essential to gain an understanding of its accuracy. Increased accuracy = increased cost. Working volume of 45 m x 5 m x 15 m with an accuracy of 20 µm Average human hair diameter 70 µm Introduction All machine tools have errors. Machine tool calibration is the process of examining a machine’s behaviour using a set of standard tests methods. From this we can establish the machine’s predictability. Machine Tool Calibration Performing a machine tool calibration is an expensive task, so getting it right first time is essential. Bad data can result in the production of bad parts or incorrect removal from service. Therefore, expert knowledge is certainly required. 72 m gantry machine for manufacturing the fuselage for the AirBus A350