Saddle,compoundrest,crossslide,toolpost.docVIP

Department of Mechanical Engineering V Semester ME 334 – Machine Tools Two Marks Questions and Answers UNIT-1 1.What is a lathe? Lathe is a machine, which removes the metal from a piece of work to the required shape size 2.what is the various operations can be performed on a lathe? Turning 6. Thread cutting 11. Grooving Facing 7. Drilling Forming 8. Boring Knurling 9. Recessing Chamfering 10. Tapping 3.what are principle parts of the lathe? Red, headstock, tailstock, carriage, crossslide, toolpost 4.what are the types of headstock? Back geared type, all geared type 5.state the various parts mounted on the carriage? Saddle, compoundrest, crossslide, tool post 6.what are the four types of tool post? Single screw Open side Four bolt Four way 7.what is an apron? The integral part of several gears, levers clutches mounted with the saddle for moving the garriage along with lead screw while thread cutting 8.state any two specification of lathe? The height of centers from the bed The maximum length of the bed 9.list any four types of lathe? Engine lathe Bench lathe Tool room lathe Semi automatic lathe Automatic lathe 10.what is a semi-automatic lathe? The lathe in which all the machining operations are performed automatically and loading and unloading of work piece, coolant on or off is performed manually 11.what is copying lathe? The tool of the lathe follows a template or master through a stylus or tracer 12.state the various feed mechanisms used for obtaining automatic feed? Tumbler gear mechanism Quick change gearbox Tumbler gear- Quick change gearbox Apron mechanism 13.list any four holding devices? Chucks Centers Face plate Angle plate 14.what are the different operations performed on the lathe? Centering, straight turning, rough turning, finish turning, shoulder turning, facing, chamfering, knurling, etc 15.define the term ‘Conicity’? The ratio of the difference in diameters of tapers its length k= D-d