KvernelandQualidisc.pptVIP

* Kverneland Qualidisc T Product information 2016 Kverneland QualidiscTrailed compact disc Robust frame design Strong and reliable bearing Hydraulic depth adjustment Lateral disc adjustment Good cutting effect Good penetration Heat treated disc Perfect levelling Finger harrow Wide roller offer Technical data Main arguments Content Robust frame design Available in 4m, 5 m, 6m and 7 m Robust frame design from cultivator range 300x200x10 mm for the central frame 100x100x8 mm for the extension Bolted frame concept to avoid weaknesses Strong drawbar from Visio and CTC The roller arms are linked to the front of the frame for better dilution of the strains Hydraulic suspension as standard 4 hydraulic cylinders on the wings 3 wheels dimensions (400-60x15.5 / 480-45x17 / 520-50 x 17) Strong and reliable bearing Fully integrated bearing Oblique contact ball bearing (40°) for high radial and axial load capacity No maintenance (no grease nipple) Hub locked by special washers Perfect sealing system with 5 lips set-up as a labyrinth + 1 extra bearing seal + one 0-ring on the disc side Big shaft ?35 mm for heavy load capacity Hub nut protected into the disc arm The access to the bearing is simple and easy. Only one nut to remove : it is not necessary to remove the complete arm 2 years warranty due to the reliable bearings 2 ball bearing with oblique contact 40° Seal with 5 lips Shaft ? 35 mm O-ring Kverneland heat treated disc ?Conical disc for keeping a constant cutting angle whatever the depth and the disc diameter are. Good cutting quality even with shallow work (3 to 5 cm). Good penetration of the disc thanks to the aggressive angles (not necessary to add weights) Can work with high stubble (maize, rape, sunflower), on ploughed lands and can destroy green fertiliser stubbles without get blocked. Small notched on the disc to ensure good penetration, good cutting effect on the whole working width and small holes in the ground to avoid a pan profi