工科所蔡錦山.ppt

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Choose the Horizontal Keyed Slot tool and click the other of the cam followers * * Two cam followers with keyed slot joints * * The snap point * * Snap point near the right end of the left cam follower * * Snap point near the left end of the right cam follower * * Duplicating a curved slot (1/2) * * Duplicating a curved slot (2/2) * * Select the original curved slot and choose Appearance from the Window menu * * Enter “Left Follower Slot” in the name field of the Appearance window * * Left Follower Slot Select the duplicated curved slot and enter “Right Follower Slot” in the name field of the Appearance window * * Right Follower Slot Verify the FOR coordinates for the Left Follower Slot (1/2) * * Verify the FOR coordinates for the Left Follower Slot (2/2) * * Verify the FOR coordinates for the Right Follower Slot (1/2) * * Verify the FOR coordinates for the Right Follower Slot (2/2) * * Attaching the Cam Followers to the Slots (1/4) * * Shift + the point Attaching the Cam Followers to the Slots (2/4) * * Attaching the Cam Followers to the Slots (3/4) * * Shift + the point Attaching the Cam Followers to the Slots (4/4) * * Dragging the cam disk * * To restore the initial conditions * * Creating the Drive Disk * * Click the center snap point of the drive disk to attach the motor * * Properties window for a motor * * Selecting the gear constraint * * Properties window for gears * * Choose Accuracy from the World menu * * Simulation Accuracy dialog * * Choose Time from the Measure menu * * Press the picture to animate the motion of the Belt-Driven Camshaft. HW#5-A Belt-Driven Camshaft (1/2) * * Cam Follower Driving Disk HW#5-A Belt-Driven Camshaft (2/2) * * * * * Conclusions CAD (Computer Aided Design) compared with Kinematics of Machines for the linkage mechanism design is @ * 工程科技研究所 副教授 蔡錦山 Simpler More Convenient More Flexible M