毕业设计（论文）-基于FPGA的DDS波形发生器的设计论文.docVIP

摘 要 Verilog-HDL硬件描述语言设计DDS波形发生器的各个模块，最后利用Altera的设计工具Quartus II并结合Modelsim软件对波形发生器进行电路设计功能仿真，并对仿真结果进行分析。仿真结果表明，波形发生器可输出正弦波、三角波、方波、锯齿波，并且可通过改变频率控制字和相位控制字的大小来改变输出波形的频率和相位。通过仿真结果表明，本设计达到了预定的要求，并证明了采用软硬件结合，利用FPGA技术实现DDS波形发生器的方法是可行的。 关键词 Abstract Waveform generator has become a modern field test one of the most widely used general-purpose equipment, on behalf of the waveform generator development. With the development of technology in all aspects of the waveform generators have become increasingly demanding. In recent years, direct digital synthesizers (DDS) has a frequency resolution because of its high-frequency conversion speed, continuous changes in the phase characteristics in digital communication systems have been widely used in modern frequency synthesis technology to become the leader in . Field-programmable gate array (FPGA) design flexibility, high speed, in digital ASIC design has been widely used, due to field-programmable gate array (FPGA) with high integration, high-speed, large capacity memory can be realized functional characteristics, can effectively achieve DDS technology, which greatly improve the performance of waveform generator and reduce production costs. This paper introduces the DDS waveform generator of the research background and DDS theory. Then a detailed account of the completion of DDS module with FPGA design process, using Verilog-HDL Hardware Description Language Design DDS waveform generator for each module and finally the use of Alteras Quartus II design tool in conjunction with Modelsim software waveform generator circuit design features simulation, and simulation results analysis. Simulation results show that the waveform generator can output sine wave, triangle wave, square wave, sawtooth wave, and can be controlled by changing the frequency and phase control words words to change the size of the output waveform of the frequency and phase. The simulation results show that this designed to meet the scheduled requirements and proof of