法国螺栓标准(NF bolt standards).doc

法国螺栓标准(NF bolt standards) ANSI　|　?BS　|　?DIN　|　?EN　|　?GB　|　?ISO　|　?JIS　|　?NF　|　?DIC 编号 中文名称 英文名称 NF A47-251-5-2003 钢丝绳接线端.安全.第5部分:U形螺栓拉线器 (Terminations for steel wire ropes - Safety - Part 5 : U-bolt wire rope grips.) NF A49-580-1988 钢管脚手架和支承架用联结件、中心螺栓和踏板.要求和测试程序 (Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.) NF A87-021-1998 焊接.弧双端螺栓焊接的双端螺栓和陶瓷箍.(欧洲标准EN ISO 13918) (Welding. Studs and ceramic ferrules for arc stud welding.) NF A89-600-1998 焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555) (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) NF E04-014-1933 机械、电气和相关工业的技术图，构架的铆钉和螺栓的图上符号表示法（１９８１．９确认） (TECHNICAL DRAWINGS FOR MECHANICAL,ELECTRICAL AND CONNECTED INDUSTRIES. GRAPHICAL SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.) NF E25-011-1992 紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母 (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).) NF E25-022-1-2001 紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.) NF E25-023-1992 紧固件.螺栓和螺钉的自由尺寸孔 (Fasteners. Clearance hole for bolts and screws.) NF E25-100-1-1999 碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) NF E25-100-3-1992 紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱 (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).) NF E25-100-4-1992 紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱 (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).) NF E25-100-6-1998 不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓 (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) NF E25-100-7-1995 紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩 (MECHANICAL PROPERTIES OF