沥青冷再生碾压工艺方案.doc

编制： 审核： 批准： 中交第一公路工程局有限公司 二零一四年六月 目 录 第一章 编制依据及说明···································1 1.1编制说明····················································1 1.2编制依据····················································1 1.3编制原则····················································1 第二章 工程概况··········································1 第三章 工程特点··········································1 第四章 总体方案········································1 3.1 施工顺序···················································2 3.2 工艺流程···················································3 3.2 施工计划···················································3 第五章 施工前准备工作···································3 5.1 人员投入···················································4 5.2 机械设备投入···············································4 5.3 材料及配合比···············································4 第六章 施工技术方案及处理措施······························ 5 6.1拌 和·····················································5 6.2 运 输·····················································6 6.3 摊 铺·····················································7 6.4 碾 压·····················································8 6.4 接缝处理···················································9 6.4 养 生 ····················································9 第七章 质量保证措施·······························9 第八章 安全生产保护措施···························11 第九章 文明施工保护措施··························· 16 第十章 附 表 ······································18 沥青稳定碎石施工方案 一 编制依据及说明 1.1编制说明 本方案编制的范围为南昌至樟树高速公路改扩建工程AP3合同段（K72+500～K86+800）沥青冷再生上基层层施工，若经过项目办、驻地办批准，则适用于本合同段所有沥青冷再生上基层层施工。 1.2编制依据 1．南昌至樟树高速公路改扩建工程招标文件技术规范。 2．南昌至樟树高速公路改扩建工程AP3合同段施工图及设计文件。 3．《公路沥青路面施工技术规范》JTJ F40-2004； 4.《公路工程质量检验评定标准》JTG F80/1-2004； 5. 《公路沥青路面再生技术规范》JTJ F41-2008 6. 《公路路面基层施工技术规范》JTJ034-2000 7．国家的法律、法规及地方有关施工安全、工地安保、人员健康、劳动保护、土地使用与管理、环境保护与文明施工方面的具体规定和技术标准。 8．我公司现有的机械设备、技术实力、施工能力和从事类似工程施工实践过程中积累的施工经验。 9. 江西省高速公路项目标准化管理指南 1.3编制原则 1．遵守合同文件各项条款要求，兑现合同承诺，认真贯彻业主、监理的指示和要求。 2．严格遵守招标合同文件明确的