工英第4章11-4.doc.docVIP

4-1~4-2 11/4( )1. The clutch is located between the transmission and the：(A) engine.　(B) wheels.　(C) differential.　(D) suspension. ( )2. In order to eliminate jumping abruptly, the clutch must engage the transmission：(A) abruptly　(B) suddenly　(C) gradually　(D) immediately ( )3. Which of the following parts is not included in the clutch？(A) The clutch fork　(B) The flywheel　(C) The clutch disc　(D) The booster ( )4. When the clutch is engaged, the pressure plate clamps the clutch disc to the：(A) release bearing　(B) release fork　(C) flywheel　(D) transmission ( )5. The drive gear has 12 teeth and the driven gear has 24 teeth, the gear ratio would be：(A) 2：1　(B) 24：12　(C) 1：2　(D) 12：24 ( )6. Which of the following system can reverse the vehicle direction？(A) Suspension　(B) Transmission　(C) Cooling　(D) Braking ( )7. Which one is not right？(A) Vehicles are required to perform under many types of loads. (B) The transmission is designed to change the torque applied to the driving wheels.(C) If the driving gear is larger, the speed of the driven gear decreases.(D) If the driving gear is smaller, the speed of the driven gear decreases. ( )8. Which of the following system can change the torque applied to the driving wheels for different applications？(A) Suspension　(B) Lubrication　(C) Transmission　(D) Braking 1 2. 1. 英譯中：All standard or manual transmissions have a clutch to engage or disengage the transmission. 2. 英譯中：When the clutch is disengaged, the flywheel and the pressure plate rotate independently. 3. 英譯中：The slave cylinder piston movement is transmitted to the clutch fork, which disengages the clutch. 4. 英譯中：The hydraulic system consists of a master cylinder and a slave cylinder. 5. 英譯中：The transmission is designed to change the torque applied to the driving wheels for different applications. 6. 英譯中：If the driving gear is smaller, the speed of the driven gear decreases. 7. 英譯中：By moving the shaft lever, gea