基于d-q坐标系的单相链式STATCOM直流电压平衡控制策略.pdfVIP

第37 卷 第9 期 电 网 技 术 Vol. 37 No. 9 2013 年9 月 Power System Technology Sep. 2013 文章编号：1000-3673 （2013 ）09-2500-07 中图分类号：TM 46 文献标志码：A 学科代码：470·40 基于 d-q 坐标系的单相链式 STATCOM 直流电压平衡控制策略 孙毅超，赵剑锋，季振东，姚晓君 （东南大学电气工程学院，江苏省 南京市 210096 ） A Balance Control Strategy of DC-Link Voltages for Single Phase Cascaded STATCOM Based on d-q Coordinates SUN Yichao, ZHAO Jianfeng, JI Zhendong, YAO Xiaojun (College of Electrical Engineering, Southeast University, Nanjing 210096, Jiangsu Province, China) ABSTRACT: DC-link voltage balance is regarded as the 置在电力系统中获得了越来越广泛的应用[1]，其中， presupposition to ensure the secure and reliable operation of 以链式静止同步补偿器(static synchronous single-phase cascaded STATCOM, and the differences of active compensator，STATCOM)为代表的柔性交流输电装 power losses among H-bridges are the basic reason leading to 置对电力系统的智能化、绿色化起着核心推动作用。 unbalanced DC-link voltages. A mathematical model of single-phase cascaded STATCOM in d-q coordinates is STATCOM 通常并联于10 kV 等级电网系统， established and based on instantaneous power theory the reason 因此多电平技术[2]成为这类装置应用于高压等级系 causing unbalanced DC-link voltages is analyzed, and a 统的关键技术。在多电平技术中，链式拓扑结构因 three-loop control strategy composed of feed-forward 其模块化程度高、等效开关频率高、可冗余运行等 decoupling current inner loop, average voltage outer loop and 优点已成为现阶段应用的主流结构[3-10] 。直流侧电 balanced voltage outer loop is designed. Comparing with the control strategy in a-b-c rest frame, the proposed control 压平衡是链式 STATCOM 能够安全可靠运行的前 strategy not only achieves the grid-side current control without 提[3-5] 。否则，因不平衡引起的直流母线过压将导致 steady-state error but also is more conveni