伺服比例阀用动圈式直线电机.pdfVIP

第 30 卷 第 9 期 中 国 电 机 工 程 学 报 Vol.30 No.9 Mar.25, 2010 92 2010 年 3 月 25 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 0258-8013 (2010) 09-0092-05 TH 137 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 伺服比例阀用动圈式直线电机 许小庆，权龙，王旭平 (太原理工大学机械电子工程研究所，山西省 太原市 030024) Moving Coil Linear Motor Used in Servo Proportional Valve XU Xiao-qing, QUAN Long, WANG Xu-ping (Institute of Mechatronics Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi Province, China) ABSTRACT: In order to develop the fast response 0 引言 electro-mechanical transformer used to drive the pilot stage of 伺服比例阀具有抗污染能力强、节流损失小等 large flow rate servo proportional valve, a novel structure of 优点，是电液控制技术领域重要的控制元件，也是 electro-mechanical transformer with shaped permanent magnet was proposed and its design principles were indicated. Magnetic 该领域内技术竞争焦点之一。现有的伺服比例阀产 circuit characteristics of the dedicated moving coil linear motor 品主要是由美国、德国、日本等发达国家研制生产 (MCLA) were studied with finite element method. The analysis 的。当系统要求流量不大时，可采用直接驱动阀 indicated that MCLA’s driving force can be increased more than (direct drive valve，DDV) ，DDV 的电–机械转换器多 7% by using shaped permanent magnet. A MCLA used to drive 数采用单向或双向比例电磁铁，研究人员对其做了 the pilot stage of large flow rate servo proportional valve was 大量研究[1-7]，为了提高动态响应，也有的阀采用大 designed and the prototype was developed. The test system for small linear motor was built and the prototype was tested. The 功率动圈式直线电机(moving coil linear motor ， test results show that the performance of the prototype can meet MCLA)直接驱动[8-10]