加填料饱和器传热传质模型研究.pdfVIP

第 30 卷 第 5 期 中 国 电 机 工 程 学 报 Vol.30 No.5 Feb.15, 2010 2010 年 2 月 15 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 87 0258-8013 (2010) 05-0087-05 TK 224 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 加填料饱和器传热传质模型研究 邱超，宋华芬，刘春琪 (上海交通大学叶轮机械研究所，上海市 徐汇区 200030) Heat and Mass Transfer Model of Packed Saturator QIU Chao, SONG Hua-fen, LIU Chun-qi (Institute of Turbomachinery, Shanghai Jiaotong University, Xuhui District, Shanghai 200030, China) ABSTRACT: A packed saturator mathematical model based 成为可能，进而提高效率。因此，饱和器是 HAT on the water film theory was established. Compared with the 循环的核心部件，其性能优劣直接影响到循环的性 experimental results, the model was proved to be effective. The 能，所以对饱和器性能的研究十分必要。 influence of the working pressure on the heat and mass transfer [1-3] 目前，人们对饱和器的研究 ，大多集中在空 was analyzed by this model, and the detailed process was 心饱和器，很少涉及到加填料饱和器，而从实际应 investigated. It is found that, with the increasing in the packed 用来看，加填料饱和器有着更好的效果[4] 。文献[5] saturator’s working pressure, the outlet air can be easier 已对加填料饱和器进行了试验研究。本文将从传热 saturated, but the absolute humidity of the outlet air decreases. 传质基本理论出发，通过建立数学模型，进一步对 And in the heat and mass transfer process, the mass will be 加填料饱和器进行理论研究。 transferred from the water film to the air all the time, while the heat transfer direction is likely to be changed. 1 加填料饱和器 KEY WORDS: water film theory; packed saturator; heat and 饱和器根据传热传质方式不同可分为空心饱 mass transfer; mathema