回转式空预器传热模型的解析-数值法.pdfVIP

26 卷 11 期 中 国 电 机 工 程 学 报 Vol.26 No.11 Jun. 2006 2006 年6 月 Proceedings of the CSEE 2006 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 （2006 ）11-0051-06 中图分类号：TK223 文献标识码：A 学科分类号：47020 求解回转式空气预热器传热模型的解析-数值法 王洪跃，毕小龙，司风琪，徐治皋 （东南大学动力工程系，江苏省南京市 210096 ） Analytical-numerical Method Based on the Model of Heat Transfer in Rotary Regenerator WANG Hong-yue, BI Xiao-long, SI Feng-qi, XU Zhi-gao (Department of Power Engineering, Southeast University, Nanji ng 210096, Jiangsu Province, China) [2-3] ABSTRACT: Singularity numerical method j ust showed 口温度分布是十分必要的。很多文献 是采用单一 2-dimension temperature distribution of metal matrix in rotary 的数值迭代法来求解回转式空气预热器相互耦合的 regenerator, an analytical-numerical computation method was 蓄热方程和能量守恒方程。这种方法的缺点是计算 presented and used to calculate mathematical equation of heat 程序对步长的选取较为严格，计算结果容易发 而 transfer model. When 600MW Tri-sectional regenerator was 且工程计算精度也不高，只能给出稳态时出口处的 selected as computational obj ect, the simulative results indicate 金属温度和介质温度。文献[4]虽然采用三分仓回转 analytical-numerical scheme was more precise and convergent 式空气预热器建立模型，但是在最后为了简化计算 and faster compared to that for traditional solutions, furthermore, it is reliable to calculate and inspect temperature 还是将一、二次风合仓，转化为双分仓进行二维仿 distribution of cold end metal matrix and exclude gas 真。文献[5]的模型求解相对复杂，最后的仿真工况 real-timely, which taking place during the transient operation of 是空气预热器变转速运行，适用范围不是很广。本