基于开关函数模型的逆变器开路故障诊断方法.pdfVIP

第30 卷 第6 期 中 国 电 机 工 程 学 报 Vol.30 No.6 Feb.25, 2010 2010 年2 月25 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 1 文章编号：0258-8013 (2010) 06-0001-06 中图分类号：TM 464 文献标志码：A 学科分类号：470·40 基于开关函数模型的逆变器开路故障诊断方法 安群涛，孙力，赵克，刘超，于丽娜 (哈尔滨工业大学电气工程系，黑龙江省 哈尔滨市 150001) Diagnosis Method for Inverter Open-circuit Fault Based on Switching Function Model AN Qun-tao, SUN Li, ZHAO Ke, LIU Chao, YU Li-na (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150001, Heilongjiang Province, China) ABSTRACT: The normal operations of motor drive systems 系统中进行实验验证，实验结果表明，所提故障诊断方法能 are directly related to the safety and reliability of inverters. 有效诊断逆变器单管和桥臂的开路故障。 Based on the analysis of switching function model for inverter 关键词：电压源逆变器；故障诊断；开路故障；开关函数； under both normal and fault statuses, a novel simplified rapid 快速诊断 diagnosis approach for component failures was proposed in this paper. Due to the different voltages endured by an IGBT under 0 引言 normal and fault modes, the simple hardware circuit was 电压源逆变器供电的电机驱动系统在航空航 adopted to detect and locate open-circuit faults. To ensure 天、军事等领域得到了广泛应用。逆变器的可靠性 effectiveness and reliability of the proposed diagnosis method, 直接影响到电机驱动系统的正常工作。为了提高系 the raise edges’ delays of switching signals were used to avoid 统的可靠性、减小体积，容错控制策略常被应用到 false diagnosis, and the delay durations were determined considering various factors. The presented diagnosis approach 功率变换单元中[1-4] 。实施容错控制的前提是对驱动 was validated by induction motor variable vo