基于相对稳定系数的滑动电接触特性.pdfVIP

第29 卷 第36 期 中 国 电 机 工 程 学 报 Vol.29 No.36 Dec. 25, 2009 2009 年12 月25 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 113 文章编号：0258-8013 (2009) 36-0113-07 中图分类号：TM 501 文献标志码：A 学科分类号：470·40 基于相对稳定系数的滑动电接触特性 郭凤仪，姜国强，赵汝彬，陈忠华，马同立，王智勇，任志玲 (辽宁工程技术大学电气与控制工程学院，辽宁省 葫芦岛市 125105) Sliding Electrical Contact Characteristics Based on Relative Stability Coefficients GUO Feng-yi, JIANG Guo-qiang, ZHAO Ru-bin, CHEN Zhong-hua, MA Tong-li, WANG Zhi-yong, REN Zhi-ling (Faculty of Electrical and Control Engineering, Liaoning Technical University, Huludao 125105, Liaoning Province, China) ABSTRACT: In order to research the sliding electrical contact 会增大，却改善了滑板的受流质量和摩擦副的摩擦稳定性， characteristics of Cu-base powder metallurgy strip under 从而使磨耗率呈现先减小后增大的 U 字形变化规律，磨耗 sliding electrical contact conditions, a lot of experiments were 率最小时对应的接触压力阈值随接触电流的增大而增大。在 carried out with a self-developed high-performance sliding 接触压力恒定条件下，摩擦副的摩擦系数随滑动速度的增加 electrical contact testing instrument. The experimental results 不断减小，但其摩擦稳定性及受流质量却不断恶化，磨耗率 were analyzed by introducing two relative stable coefficients 随滑动速度的增加而减小，随接触电流的增加而增大。 and current-carrying efficiency, some rules between the above 关键词：滑动电接触；相对稳定系数；载流特性；磨耗率 characteristics of slide and contact pressure, sliding speed and contact current were obtained. Under constant sliding speed 0 引言 conditions, the friction coefficient increases with the increase 载流摩擦副是一种非常特殊的摩擦副，被广泛 of contact pressure, but both the property of current-carrying and the friction