两相体介质阻挡放电中的三种放电形式.pdfVIP

第32 卷 第22 期 中 国 电 机 工 程 学 报 Vol.32 No.22 Aug. 5, 2012 182 2012 年8 月5 日 Proceedings of the CSEE ©2012 Chin.Soc.for Elec.Eng. 0258-8013 (2012) 22-0182-06 TM 85 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 两相体介质阻挡放电中的三种放电形式 陈田，叶齐政，谭丹，杨芾藜 (强电磁工程与新技术国家重点实验室(华中科技大学) ，湖北省 武汉市 430074) Three Discharge Modes of Dielectric Barrier Discharge in a Two-phase Mixture CHEN Tian, YE Qizheng, TAN Dan, YANG Fuli (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (Huazhong University of Science and Technology), Wuhan 430074, Hubei Province, China) ABSTRACT: Dielectric barrier discharge in a two-phase KEY WORDS: dielectric barrier discharge in a two-phase mixture (TPM-DBD) with considerable advantages of high mixture (TPM-DBD); remaining gap; pore discharge; efficiency, low energy consumption and higher energy density inter-particle distance at the atmospheric pressure, has been widely used in exhaust 摘要：两相体介质阻挡放电(dielectric barrier discharge in a gas treatment. An important factor affecting the reaction two-phase mixture ，TPM-DBD)是在大气压下产生低温等离 efficiency is the way of filling solid beads. To investigate the 子体的重要方法，因具有很高的能量密度而被广泛应用在污 mechanism of this factor, γ-Al2O3 particles were used as the 染治理中。为研究介质颗粒的填充方式对 TPM-DBD 的影 filler and photomicrographs of the discharge are taken in 响，以γ-Al2O3 作为填充介质颗粒，将数码相机与体视显微 different filling ways by the combination of digital camera with 镜连体拍摄放电显微照片。结果发现，随着电压变化， microscop