低压旋流雾化喷嘴内液固两相流动的数值研究.pdfVIP

第29 卷 第26 期 中 国 电 机 工 程 学 报 Vol.29 No.26 Sep. 15, 2009 2009 年9 月15 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 63 0258-8013 (2009) 26-0063-05 TK 227 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 低压旋流雾化喷嘴内液固两相流动的数值研究 1 1 2 闫云飞，张力，高振宇 (1．重庆大学动力工程学院，重庆市 沙坪坝区 400030 ； 2．重庆赛迪工业炉有限公司，重庆市 渝中区 400013) Numerical Study on Liquid-solid Two-phase Flow in Low-pressure Swirl Atomizing Nozzle 1 1 2 YAN Yun-fei , ZHANG Li , GAO Zhen-yu (1. College of Power Engineering, Chongqing University, Shapingba District, Chongqing 400030,China; 2. Chongqing Saidi Industrial Furnace Co. Ltd, Yuzhong District, Chongqing 400013, China) ABSTRACT: In view of the current liquid and solid two-phase 嘴旋流室内壁面附近颗粒浓度远大于中心区域，喷嘴渐缩段 pressure atomizing nozzles require high pressure and the good 中部受磨损最快。喷嘴内沿径向CaO 颗粒相分布的转折点 atomization effect is difficult to ensure, the flow and atomizing 位置相同，壁面附近过高的 CaO 颗粒浓度也不利于浆液的 characteristics of the nozzle under low pressure were improved 雾化。液固两相存在较为明显的速度滑移，且流速越大滑移 by using the swirl technology. Based on continuum theory and 速度也越大。在渐缩段与喷孔段，液体相速度比颗粒相速度 liquid and solid two-phase interactions, the three-dimensional 变化的更快。 flow characteristics of liquid-solid two-phase in low pressure swirl atomizing nozzle were studied using k-ε/RNG of 关键词：低压；旋流；液固两相流；雾化；喷嘴；数值研究 two-equation model and