三峡右岸全空冷水轮发电机关键技术研究.pdfVIP

第29 卷 第15 期 中 国 电 机 工 程 学 报 Vol.29 No.15 May 25, 2009 74 2009 年5 月25 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 0258-8013 (2009) 15-0074-06 TM 312 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 三峡右岸全空冷水轮发电机关键技术研究 王国海 (哈尔滨电机厂有限责任公司，黑龙江省 哈尔滨市 150040) Research on Key Technologies of Installed in Three Gorges Right Bank Station Fully Air Cooled Hydro-generators WANG Guo-hai (Harbin Electric Machinery Company Limited, Harbin 150040, Heilongjiang Province, China) ABSTRACT: Important design and manufacture technologies 限责任公司(简称哈电公司)生产的巨型全空冷水轮 of fully air cooled hydroelectric generator installed in Three 发电机组以其优良的水力性能、创新的发电机全空冷 Gorges Right Bank Station is introduced. Firstly, the design of 方式和独特的绝缘工艺等三大关键技术创下了新的 ventilation system and calculation of temperature field are discussed. By means of ventilation model test, optimization of 世界之最。哈电公司生产的三峡右岸26 号机组是目 ventilation system is performed. For insulation, by increasing 前世界上采用全空冷技术的最大容量机组，其发电机 the radius of conductor fillet, the uniformity of the corner 最大功率为840 MVA。该机组于2007 年7 月10 日 electric field strength of conductors is improved. By adopting 移交电厂后，已经首稳百日的考核，机组运行稳定， slot-part anti-corona structure of stator bars with once-formed thin-type solidity fiberglass tape and manufacturing process of 各项性能指标达到了设计标准。本文着重讲述具有哈 resin-rich epoxy fiberglass mica paper insulation, electric aging 电自主知识产权的三项关键技术中，涉及发电机的两 life index is greatly improved. Operation results show that fully 项关键技术。 air cooling struc