a novel magnetic actuator design for active damping of machining tools：一种新型的加工工具主动阻尼磁驱动装置的设计.pdfVIP

International Journal of Machine Tools Manufacture 85 (2014) 58–69 Contents lists available at ScienceDirect International Journal of Machine Tools Manufacture journal homepage: /locate/ijmactool A novel magnetic actuator design for active damping of machining tools Fan Chen a,b,n, Xiaodong Lu a, Yusuf Altintas b a Precision Mechatronics Laboratory, Department of Mechanical Engineering, The University of British Columbia, Vancouver, BC, Canada V6T 1Z4 b Manufacturing Automation Laboratory, Department of Mechanical Engineering, The University of British Columbia, Vancouver, BC, Canada V6T 1Z4 a r t i c l e i n f o a b s t r a c t Article history: Parts and cutting tools with large structural flexibility experience both forced and chatter vibrations Received 14 March 2014 during machining, resulting in poor surface finish or damage to the machine. This paper presents the Received in revised form design principles of a novel 3 degrees of freedom linear magnetic actuator which increases the damping 10 May 2014 and static stiffness of flexible structures during machining. The proposed actuator can deliver 248 N Accepted 10 May 2014 force in two radial (x, y ) directions and 34 N m (torque) in torsional (θ) direction up to 850 Hz. The Available online 16 May 2014 force and torque reduces to 107 N and 14.5 N m at 2000 Hz, hence it can actively damp a wide range of Keywords: structural modes. The ma