毕业设计基于构件的软件自动组装技术.doc

海 南 大 学 毕 业 论 文（设计） 题 目：基于构件的软件自动组装技术 学 号： 姓 名： 年 级： 学 院：信息科学技术学院 系 别： 专 业： 指导教师 完成日期：20年 月 日 摘 要 如今基于构件的软件复用和开发被认为是提高软件生产率和软件质量的有效途径。一般来说，基于构件的软件复用包括三个相关的过程：构件的开发，构件的管理和基于构件组装的系统开发。在基于构件的软件开发中，系统开发的重点从系统设计变成构件组装。本文研究的就是这种基于构件的软件自动组装技术。 开发该系统，我使用面向对象的可视化开发工具Visual Basic 6.0，运用计算机软件技术和面向对象的软件开发方法。首先制作出用于模拟构件的芯片（芯片的部分内部功能由指导老师提供），其次设计出一个相对比较简单的连接件（因连接件的开发另有同学研究），最后采用事件触发的方法，运用连接件实现模拟构件（芯片）间的组装，同时，实现功能芯片间的模拟防真。 通过该系统的研究开发，使我获益匪浅，不但对基于构件的软件自动组装技术有了更深刻的认识，而且对开发工具Visual Basic 6.0有了更全面的掌握。当然，限于作者水平，本系统难免有疏漏和不完善之处，敬请各位老师不吝指正。 关键词：构件；软件构件；连接件；软件复用；构件组装 Abstract Now component-based software reuse and development is considered as an effective and efficient approach to improve the productivity and quality of software development. Generally, component-based software reuse includes three processes: component development, component management and system development which is based on component composition. In the component-based software development, the emphasis of system development has been turned to component composition from system design. This text is studying the technology of component-based software composition automatically. In order to develop this system, I used the objected-oriented visual tool Visual Basic 6.0 , computer software technology and the method of objected-oriented software development .Firstly, I developed the chips whose some interior functions were offered by the teacher to simulate components. Secondly, I developed a simple connective-ware , because there was another student studied it specially. Finally, I let the system come true with the method of event-driven and connective-ware, simultaneity, these chips could simulate the truth. By developing this system, I benefit a lot, not only understand the technology which component-based software composition automatically even more, but also master the tool Visual B