打印技术基础详解.pptVIP

Presentation Title * One of the parameters that defines the “quality”of the original file is the resolution. The resolution is defined as the number of pixels per unit of length (DPI: dots per inch) Resolution x2 -- File size x4 By increasing the resolution, we increase the fidelity to the original file Presentation Title * Printing at two times throughput is something that in and of itself sounds impressive, but doubling the speed is not simply the challenge. Doubling the speed, while maintaining the image quality, and while maintaining HP robustness; that’s where the challenge is. New HP Double Swath Technology delivers high speed at HP quality What we have done is to use two long-life HP printheads for each color, leveraged from HP BIJ3000. So, we get a virtual pen of 1048nozzles per color, a wider print swath, 1.66”, and a higher firing frequency, 36Kdrops/sec/nozzle Now, what happens? When you do this, there would naturally be a mechanical discontinuity between the two pens. Then, we’re actually overlapping these 2 pens by 24 nozzles. And what we do, buried within the machine, within the machine’s algorithms, is look for the closest continuity within this overlap of 24. What this allows us to do is maintain the image quality while stretching the technology across double width. Paper is kept flat in the print zone thanks to a vacuum system that sucks the paper down. The challenge is to support a wide variety of media types, that behaves very differently with the ink, has very different friction levels… so, we have developed a vacuum system with 2 chambers, each with its own control. In addition to that, in general, holding advance accuracy across two inches is much more difficult than for one inch. We’ve made some changes in our advance mechanism to ensure IQ across two times the throughput. Previously we were using digital encoder technology to control the advance, which had a limited resolution, and we’ve switched to analog which essentially gives us m