轴承的安装和拆卸精要.pptVIP

Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * * Some bearing applications may require an alignment phase eg motor and pump set * All rotating machines are affected by misalignment and very often those machines play a very important role in the industrial production process. These machines are used in any type of industry regardless of the type or size of the customer. 对中 因轴不对中引起额外的能量消耗: 典型举例: 马达 - 10 kW 能耗成本 1 kWh = 0.05 $ 1台10 kW马达的成本 = 4.380$/year 由于不对中造成的5%的能耗增加: +219$/year 如果是150台马达: +32.850$/year 而一台TMEA 2的投资仅仅是: 大约. 5.500$  轴对中 轴对中操作可以因此快速而精确 TMEA 系列 TMEA 1P 1PEX TMEA 2 轴对中主要应用于: 电机 汽轮机 电动马达 泵 风机及风扇 压缩机 齿轮箱 SKF 皮带轮对中工具 TMEB 2 方便,快捷地操作皮带轮对中! 谢 谢 大 家！ Mounted and Dismounting 5 - * * With these new heaters the coil is placed on the outside, which gives much better performance especially when the bearing is placed around the coil as you can see on the picture For info : - TIH 070m = replaced TIH 030 and 060 - TIH 090m = replaced the TIH 065 and also the TIH 120 - TIH 210m = replaced the TIH 120 and also eats into the TIH 240 range * This table helps you to select the right heater, bore diameter vs. bearing weight (e.g. TMBH 1 up to 100mm and 5 kg) * Hydraulic Oil Injection Method Oil Assist using Hydraulic Nut, mounting bearing on Tapered Shafting. Larger Bearings can also be floated on the shaft if properly prepared. * Mounting with Sleeves Hydraulically There are several ways to mount bearings using Hydraulic Assist. Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * If pulling has been applied to the ring with press fit, the bearing may still be useable There’s no single puller for every dismounting job Mounted and Dismounting 5 - * Mounted and Dismounting 5 - * Viton is one familiar brand name for Fluoroelastomers. Vit