[计算机.思科网络技术学院CCNA中英文教程Exploration.配套eagle.server实验光盘].E1_Lab_orientation-instr.docVIP

Lab Orientation and Setup Topology Diagram Device Interface IP Address Subnet Mask Default Gateway R1-ISP S0/0/0 52 N/A Fa0/0 53 N/A R2-Central S0/0/0 52 Fa0/0 54 N/A Eagle Server N/A 54 53 N/A 54 N/A hostPod#A N/A 172.16.Pod#.1 54 hostPod#B N/A 172.16.Pod#.2 54 S1-Central N/A 54  Objectives Understand the purpose of the lab devices. Understand and cable the lab physical topology. Understand and configure the logical network and configure Cisco devices. Verify end-to-end network connectivity. Background Labs are designed to reinforce computer networking concepts that are taught in curriculum. The labs provide discovery and experience in configuring Cisco switches and routers to construct a functional computer network. In addition to the simulated network labs used with Packet Tracer, students also gain valuable hands-on experience with real equipment. This lab orientation is an examination of the lab topology, network components, logical network addressing, and connectivity testing. The lab environment is self-contained, and requires no outside connectivity to the Internet to perform labs. Student labs consist of configuring host computers to connect different devices on the local area network (LAN), configure connectivity to the wide area network (WAN), and use typical network services such as DNS to access network services. In later labs, students use the real equipment to capture and analyze data communications and troubleshoot common network configuration issues on computer hosts, Cisco switches, and Cisco routers. The lab environment is designed to be separate from a production network, and requires no additional connectivity to any other network to complete student labs. All resources that the students will use to complete labs are shown in the above topology diagram. Some network client software for host computers such as Wireshark, may need to be installed but is available on Eagle Server for download. The Eagle Server FAQs co