工程材料即机械制造基础7.pptVIP

Fabrication of Ceramics and Composites Usual steps in traditional ceramics processing: (1) preparation of raw materials, (2) shaping, (3) drying, and (4) firing Part (a) shows the workpart during the sequence, while (b) shows the condition of the powders Shaping Ceramics Casting Plastic forming Pressing Shaping Ceramics Drying and Firing Can be finished carefully Machining Joining Machining Cracking Weak before firing Uses non-traditional methods Product Design Stronger in compression Almost no ductility Simple geometries Shrinkage No screw threads Fabrication of Composites Starting Mat