机电一体化毕业论文-郑州经贸职业学院资料.docVIP

毕业论文 题目名称：基于PLC的工业污水处理系统设计 系部名称： 班 级： 学 号： 学生姓名： 指导教师：  基于PLC的工业污水处理系统设计 摘 要 近年来,污水处理厂已成为各个城市最主要的基础设施之一。尤其是中小城市,新建或者扩建污水处理厂已成为当地政府改善人民生活水平的一等大事。随着自动化技术、计算机技术的不断发展、完善,污水处理厂的自动化水平也相应提高。而PLC控制器以其技术成熟、通用性好、可靠性高、安装灵活、扩展方便、性能价格比高等一系列优点，在工业控制中得到了越来越广泛的应用。本文主要为您介绍污水处理厂自动控制系统的组成、功能及如何利用PLC实现自动控制,并介绍了在系统实施中遇到的若干问题及其解决措施。在污水处理中采用PLC控制系统改造后，提高了自动控制的可靠性,不仅能极大减轻工人的劳动强度,而且可以提高污水处理厂的运行效率和运行效益,实现了污水厂生产管理的科学性。 关键词：PLC,污水处理,SBR反应 Design based on the PLC industrial sewage processing system Abstract In recent years, sewage treatment plant has already become one of the most important infrastructures in every city, and especially in small and medium-sized ones, to build and expand such plants has been on the local governments’ top agenda to improve peoples’ life. With the development and improvement of automation technique and computer technology, automation level of sewage treatment plants has also made a corresponding leap. While PLC has series of merits such as: mature technique, fine universal property, high reliability, flexible to install, convenient to expand, excellent cost performance, etc, which have enabled it gain a more and more widespread application in industrial control. This paper will mainly introduce the composition and function of the automatic control system in sewage treatment plants and several problems that may occur in the practical use of the system and the possible solutions to them. Since the transformation by employing PLC control system in sewage treatment, the reliability of automatic control has been advanced, which has not only reduced workers’ work intensity, but also improved the operational efficiency of the sewage treatment plants, thus has made the scientific administration of manufacturing in sewage treatment plants possible. Key words: PLC, Sewage treatment, SBR reaction 目　　录 1 引言 4 2 系统总体设计 4 3 控制系统设计 5 3.1 除渣 5 3.2 除油 6 3.3 中和处理 7 3.4 除有机物 8 3.5 除盐 9 4 PLC选型 10 4.1 PLC的I/O口分配 11 4.2 系统外部接线图 12 4.3 软件设计 12 5 上位机与下位机的设计 13 5.1 上位机设计